Data East Jurassic Park Scoops, Shooter Eject Protector Set and "T" Gate

Click on thumbnails for bigger pics!

    The full JP playfield set protectors! HUGE thanks to the Pinball Cowboy - John Rhodes, Boyd Bottorff, Gerry Manis and Alan Humphreys for all the testing and trial fitting. Special thanks to John for actually bringing his game to make templates from :)

    Here's the Power Shed protector installed. Looks pretty nice! You'll need to loosen the ramp and lift it a little to squeeze the protector into the hole.

    And here's the protectors for the Bunker and Control Room. The scoops are a single assembly and must be relocated as far back in the holes as possible. If the scoop assembly is not moved back the ball will NOT go down the Bunker hole. Relocation is very simple and should only take about 10 minutes. Simply flip up the playfield, remove the 3 screws holding the scoop assembly, slide back against the holes and reinstall screws. You may not be able to reinstall the middle screw as it may be on the edge of the old screw hole but that's ok, it holds fine without it. You shouldn't have to drill new holes for the screws, just push hard with your 1/4" nut driver and the screws will make their own holes. Done!

    The T-Rex kickout gets plenty beat around the edges but my protector takes care of that!

    Shooter ejects aligned on a bare playfield. No more nasty ball divots here!

        This is a new replacement for the common Data East "T" ball gate. They are often dented or even missing as they frequently broke off at the lower T section. Big thanks to Spencer Carey for all the help making this!

    Here's the OEM gate on Jurassic Park for location purposes. Note that you'll need to unbend one side of the axle wire and save it to install the new gate. If it breaks you can use .065 (1.67mm) music wire available at any good hardware store.

Dinos loose in your park? Only $90 for the 6 piece playfield set or $18 for the pop bumper T gate!
Click HERE to email for info and get yours! (will open your system default email program)

Shipping cost not included in prices.Shipped first class via USPS. If Priority Mail desired please specify at time of order.
California residents must add sales tax