The following is a pictorial guide showing how to install Cliffy's™ shooter eject protectors. Sterns Ghostbusters™ is the game shown
Apron removed
View underneath
Remove autolauncher Access to side
rail screws Rail screws removed 90%
Rail loosened
Moving to the main eject Loosen stud nuts...
but leave them on the end and tap with small hammer
Studs removed
Place protector
Drop studs in place
Tighten stud nuts slowly Tighten till flat, no more
Now for right side eject Lay protector near
rail Lift rail
Slide protector in place Clamp BEFORE screws
Enjoy your handiwork!
This process applies to nearly all shooter ejects although many are different
styles